With the bracket doors open, slide the blinds headrail into the brackets. Each bracket comes with two screws. These blinds stick solidly to the pained metal front doors, fit perfectly and under the door handles. I like the idea of being able to open the blinds for just light or pulling the blind up for our dogs to look out the door. Sometimes the hardware for your whole room is in one box even if your blinds arrived in separate boxes. They provide more privacy and look so much better! The blind holders are what is magnetic, so if your blinds break, you can purchase blinds from anywhere and still utilize the holders.
Very happy with the quality and am enjoying the new look of my front door. I am so happy with these blinds, they work great! We installed a curtain rod over the door in order to cover the window in the evening hours, but were not able to open the door when the curtain was closed. When you choose an Inside Mount, you'll be giving us the exact measurements of your window, and the factory will make your blind slightly more narrow so that it moves properly up and down within your window. Those frames are not really solid. I had gotten this blind before and it was kind of worn out! As an alternative, you might look into something like this: Otherwise, I think you are right that the ceiling is maybe your only other option, but this is done regularly and should look fine. The magnetic blinds arrived, my husband put it up without any problems. It has a strong magnet and is so easy to install.
Pre drill your holes and insert drywall anchors, if using. Article Summary To install blinds, start by making marks on the wall where you want to hang the blinds, either inside the window frame or on the wall above it, depending on your preference. When Collections sent me for the first time a magazine, there was exactly what I needed. This article has also been viewed 356,919 times. Thanks again for all of your advice on this.
For an outside mount, you hang your blinds on the wall above the window opening. Place them inside the pencil marks you have made. We open the blinds during the day and close it at night for privacy. With new door that has trim around window you have to go above window to make it wide enough. I'd seen these blinds on Collections for years, but hesitated, not knowing how effective the magnets would be.
The magnets are really strong and all it took was to put the magnets on the door and slide in the blind. I hope the velcro, in place of the magnets work. Unwind your cords and lower your blinds by pulling your cord toward the center of the window. Inside Mount or Outside Mount for my Window Blinds? The magnet work very well! I did add a small piece of 2 sided tape to each side of the bottoms to keep them from swinging when opening and closing the doors. Unpack your blinds and make sure all of the parts are there. When you unpack your blinds your cords may be stuffed into the headrail.
Step 10: Attach the tilt wand Look for a small plastic spinning mechanism sticking out of one side of the head rail. We had to screw the brackets directly to the door. You will need to make some pencil marks so that you know where to place your brackets. Mark the window frame where the brackets will be installed. That is because they fit inside the window frame, and can be mounted as deep or as shallow as you like.
Once you realize that, they work just fine and look good while providing the privacy I want. Rather than spending big bucks to get someone to install your blinds for you, why not do it yourself? Step 7: Drill holes Hold the brackets up to the frame to mark exactly where the screws should go, and use an electric drill to create holes for attaching them. I have had them up now for two weeks and they have not fallen down or slipped from their original position yet, even with me going in and out of the doors. They forgot to send the extension brackets for the side windows so I am waiting for those to finish the job. Mark the width and cut according to the directions.
When you ordered your blinds you should have chosen between an inside mount and outside mount. Finally, close the bracket doors and attach the valance to the head rail. If you do accidentally latch the door, open it with a flathead screwdriver. These guidelines, and more, can be before posting. Another magnet would be helpful.
Our door is metal, so the magnetic feature is perfect. I used velcro to solve the problem. They work well now and look attractive. You need to do this to make sure that you buy the correct size of blind. To create this article, 17 people, some anonymous, worked to edit and improve it over time. We needed something for the west-facing door from the eat-in area to the back yard because of the sun later in the day.
I am very gentle on house. This blind is a great answer to the problem and looked great. Take the width and height measurements of the window three separate times to ensure a correct fit. Snap your valance onto the valance clips. I have privacy when needed and lots of sunshine when I want it. My daughter installed it the moment it arrived and said it was very easy and quick. Lets light in but provides privacy.